[Home]
[Up]

Click Here for Wildanimalstickers Discount Coupon Code Information

 
Application Instructions :
The stickers are designed for best use on any flat, clean, dry, indoor surface. To apply, remove entire backing. Be careful not to bend or kink the sticker. After backing is removed, press exposed sticker to surface. Finish by softly rubbing the entire sticker with a soft cloth, making sure to include all edges. On the larger stickers it may be easier to peel and stick a top portion first and then remove the remaining backing. Finish by rubbing with a soft cloth. If, after completion, you are unhappy with the positioning, simply remove and stick again. If the sticker does not stick well or curls at the edges, follow the instructions below.

To Apply to Rough or Glossy Surfaces
The stickers work best on flat walls with clean, dry flat paint. They will work on other surfaces with varying degrees of success. When you get your order, try a small sticker. If it doesn't stick well, there is a product that can be used to increase the adhesion. This product creates a stronger bond, but can still be removed. You can get it at Staples or other office supply stores. It is made by 3M and it is called Super77. Put the sticker on the wall. Spray some adhesive into a paper cup. Using a small 1/2" brush, lift the edge of the sticker off the wall and paint the adhesive on the back of the sticker. Push the edge back on the wall. The sticker will stick within a few minutes as the adhesive dries. Be careful not to get Super77 on the face of the sticker. Paint thinner can be used to clean excess glue, but may damage the sticker. If the walls are very glossy, you can try using Hi-Strength 90 by 3M. We recommend that this procedure be used in high traffic and commercial installations such as nursery schools and pediatric centers.

Removing Stickers
The stickers are removable. Adhesive will not remain on the wall when the stickers are removed